Icom IC-2800H Instruction Manual page 16

2
PANEL DESCRIPTION
KEY
• Clears a digit before entry.
• Cancels the monitor, scan, priority watch,
MW
DTMF memory, mute function or set
A
CLR
mode condition.
Enters set mode and decreases the set
D-OFF
B
SET
mode selection order.
• Sets the keypad for numeral input.
T-OFF
C
ENT • Advances the set mode selection order
after entering set mode.
Increases the squelch level.
MUTE
• The [SQL] controls on the controller unit have
D
SQL
priority when rotated.
Decreases the squelch level.
16KEY LOCK
• The [SQL] controls on the controller unit have
#
SQL
priority when rotated.
Decreases the audio output.
TONE-1
• The [VOL] controls on the controller unit have
M
VOL
priority when rotated.
12
FUNCTION
(p. 22)
(pgs. 24, 42, 48, 54)
(p. 22)
(p. 23)
(p. 23)
(p. 23)
SECONDARY FUNCTION (after
• Writes the VFO contents into the memory
channel or call channel.
• Advances the memory channel number
when continuously pushed after program-
ming is completed.
DTMF memory OFF.
Turns the subaudible tone encoder, pocket
beep or tone squelch OFF. (pgs. 27, 50, 52)
Mutes both band's audio.
• Mute function is released when any operation is
performed.
Locks the digit keys on the keypad (including
M
the A–D, # and keys).
Sends a 1750 Hz tone signal for 0.5 sec.
) OTHER FUNCTIONS
FUNC
(pgs. 34, 39)
(p. 34) After :
DTMF-S
Transmit the appropriate
DTMF code or push [0]
to [9], [A] to [D] to trans-
mit the DTMF memory
contents when
DTMF memory encoder
is activated.
(p. 24)
(p. 19)
After :
DTMF
Transmit the appropriate
DTMF code.
(p. 28)
the
(p. 54)
(p. 54)