Hm-98 Microphone - Icom IC-2800H Instruction Manual

2
PANEL DESCRIPTION

HM-98 microphone*

w
q
q UP/DOWN SWITCHES
Push either switch to change the operating frequency,
memory channel, set mode contents, etc. (p. 20)
Push either switch for 2 sec. to start scanning. (p. 43)
w PTT SWITCH
Push and hold to transmit; release to receive. (p. 24)
Toggles between transmitting and receiving while the
one-touch PTT function is in use. (p. 25)
10
e r t
LOCK CALL SUB
y
VFO MR BAND
F-1
u
F-2
i
Mic element
DTMF-S FUNC
AFC AFC-OFF PTT-M MW
1 2 3 A o
MONI SCAN PRIO CLR
PGR CSQL DTMF D-OFF
4 5 6 B
HIGH MID LOW SET
TONE TSQLS TSQL T-OFF
7 8 9 C
DUP– DUP+ SIMP ENT
TONE-1 TONE-2 16KEY LOCK MUTE
0 # D
VOL VOL SQL SQL
* Some versions are
supplied with the
HM-97/118 instead.
[Y Y ]/[Z Z ]
e VFO SWITCH [VFO (LOCK)]
Push to select VFO mode. (p. 18)
Push for 2 sec. to toggle the lock function. (p. 19)
r MEMORY SWITCH [MR (CALL)]
Push to select memory mode.
Push for 2 sec. to select the call channel. (p. 38)
t ACTIVITY INDICATOR
Lights red while a key is pushed; lights green while the
one-touch PTT function is in use.
y BAND SWITCH [BAND (SUB)] (p.18)
Push to toggle the operating band or set the sub band
as the main band.
Push for 2 sec. to toggle the sub band access function.
u FUNCTION SWITCHES [F-1]/[F-2] (p.67)
Assign your desired key function from the front panel
switches.
• Default settings are [VHF M/C] for [F-1] and [UHF M/C] for [F-2].
i FUNCTION INDICATOR
Lights orange while [FUNC] is activated—indicates the
secondary function of switches can be accessed.
Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad. (p. 55)
o KEYPAD
Used for controlling the transceiver, transmitting DTMF sig-
nals, etc. See the following 2 pages for details.