34
7.8 Adjusting the leg supports
The distance between the footplates and the sitting surface influences sitting stability. The height adjustment acts
on the pelvis and ischial bones.
7.8.1 Adjusting the lower leg length
The required leg support height depends on the lower leg length of the user and the thickness of the seat cushion.
1) Loosen the Allen head screw:
→ "Angle-adjustable" leg support: see fig. 36
→ "Segmented, angle-adjustable" leg support: see fig. 37
→ "Elevating" leg support: see fig. 38
2) Adjust the tube footrest according to the user's lower leg length.
INFORMATION: Ensure that the tube footrest is inserted into the swivel segment by at least 40 mm (up
to the mark).
3) Tighten the Allen head screw to 6 Nm.
36
38
7.8.2 Adjusting the support angle
The leg support angle setting should be chosen so that the ankle is in a relaxed, comfortable position.
Motus CV, Motus CS
Settings and assembly instructions
35
37
27