Removing The Padded Arm Support; Push Handles; Adjusting The Height Of The Push Handles - Otto Bock Motus CV Instructions For Use Manual

Use
74
76

9.6.3 Removing the padded arm support

1) Pull the armrests up out of the holders (not illustrated).
2) Fold the armrests away by 90° or remove them.
3) After getting in, slide the armrests down into the holders again.

9.7 Push handles

The push handles make pushing the wheelchair easier for the attendant.
Some of the push handle designs allow the height to be adjusted to suit the needs of the attendant.

9.7.1 Adjusting the height of the push handles

To enable ergonomic pushing by the attendant, the wheelchair can be equipped with height-adjustable push
handles.
1) Release the clamping lever.
2) Adjust the height of the push handle.
INFORMATION: Adjust both push handles to the same height.
3) Engage the clamping lever.
77
40
75
78
Motus CV, Motus CS