Adjusting The Height Of The Forearm Support; Removing The Side Panels - Otto Bock Motus CV Instructions For Use Manual

9.6.1 Adjusting the height of the forearm support

Desk side panel
1) Pull up the release button in the round opening (see fig. 72, item 1
2) Push the armrest to the desired position.
3) Let go of the release button.
→ The armrest locks into place automatically.
"Plug-on" side panel
1) Use a ballpoint pen or screwdriver to press the counter-sunk locking button (see fig. 73).
2) Slide the side panel to the desired position.
CAUTION! The locking button is intentionally counter-sunk to prevent accidental operation. Always
use an object to press the locking button, never your fingers.
72
"Standard" side panel and "clothing protector" side panel
The "standard" side panel (not illustrated) and the "clothing protector" side panel cannot be adjusted in height.
Both side panels can be combined with padded armrests.
Armrest, padded
This armrest can have its height adjusted by qualified personnel to match the user's requirements.
Subsequent adjustments may be made only by qualified personnel.

9.6.2 Removing the side panels

INFORMATION
Side panels with permanent screw connections cannot be removed.
To make getting into the wheelchair easier and for transportation, the "plug-on" and desk side panels can be
removed.
Removing the desk side panels
1) Press the half-moon-shaped button and fold back the side panel (see fig. 74, item 1).
2) In the vertical position, pull the side panel up and off (see fig. 75).
Installing the desk side panels
1) Insert the side panel in the adapter (see fig. 75).
2) Fold the side panel forward. The locking mechanism engages.
Removing/installing the "plug-on" side panels
1) Pull the side panels out of the guides on the side panel mountings (see fig. 76).
2) After getting in, slide the side panels back into the side panel mountings.
Motus CV, Motus CS
73
Use
39