Otto Bock Motus CV Instructions For Use Manual page 51

NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
► Never place heavy objects on the folded product.
INFORMATION
► When transporting the wheelchair in vehicles, fold it up and remove the wheels and leg supports if necessary.
► Follow the IATA (International Air Transport Association) rules and those of the relevant airline when trans­
porting the wheelchair in an aircraft. Inform the airline several days before your flight. Use the SSR (special
service request) codes to describe the type of limited mobility if necessary. You can for example research
these on the Internet.
The wheelchair must be prepared for transport in a passenger vehicle.
1) Fold up the foot plates (see Page 34).
2) Motus CV only: Swing away the leg supports, remove and set aside (see Page 33; see fig. 103).
3) If necessary: Detach the seat cushion from the hook-and-loop fastener.
4) Pull up the seat upholstery until the wheelchair folds together (see fig. 104).
5) Fasten the safety strap (see fig. 105, item 1).
6) Remove the drive wheels (see Page 42).
7) Place the disassembled wheelchair in the vehicle.
103
105
Motus CV, Motus CS
104
Use
51