Removing And Attaching The Leg Supports - Otto Bock Motus CV Instructions For Use Manual

50

9.3.1 Removing and attaching the leg supports

The leg supports on the Motus CV can be removed to make it easier for the user to get in and out.
Removing the "segmented, angle-adjustable" leg support
1) Fold the foot plate up.
2) Pull back the release lever (see fig. 51).
3) Fold the leg support out by 90 ° and remove it (see fig. 52). Now the leg support can be lifted up and off.
Mounting the "segmented, angle-adjustable" leg support
1) Hold the leg support 90 ° out to the side and insert it into the leg support retainer (see fig. 52).
2) Swing the leg support into the direction of travel until it engages.
3) Fold the foot plate down.
51
Removing the "elevating" leg support
1) Activate the release lever (see fig. 53, item 1).
2) Swing the leg support outwards and to the side by 90° (see fig. 53, item 2) and pull up to detach.
Mounting the "elevating" leg support
1) Hold the leg support 90° out to the side and insert the pivot bearing into the leg support retainer (see fig. 54,
item 1/2).
2) Swing the leg support into the direction of travel until it engages.
Motus CV, Motus CS
52
Use
33