Explanation Of Symbols; Single Components - Otto Bock 10A3 Instructions For Use Manual

INFORMATION
Last update: 2020-09-15
• Please read this document carefully before using the product and
observe the safety notices.
• Instruct the user in the safe use of the product.
• Please contact the manufacturer if you have questions about the pro-
duct or in case of problems.
• Report each serious incident in connection with the product, in par-
ticular a worsening of the state of health, to the manufacturer and to
the relevant authority in your country.
• Please keep this document for your records.

Explanation of symbols

Warnings regarding possible risks of severe accident or injury.
WARNING
Warnings regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
Additional information on the fitting / use.
INFORMATION
The scope of delivery is shown on the front page.

1 Single components

1.1 Single components
For available single components refer to the catalogue
2 Description
2.1 Indications for use
The 10A3, 10A4, Ottobock work tools, 10V15 Standard Connector and
11S33 Quick-disconnect Wrist Adapter with Standard Connector are to
be used solely for the fitting of upper limb prostheses.
English
Ottobock | 7