Action Codes For Modifying Tacacs+ And Radius Group And User Settings - Cisco 3.3 User Manual

Appendix F RDBMS Synchronization Import Definitions
Action Codes for Modifying TACACS+ and RADIUS Group and
User Settings
Table F-5

Action Codes for Modifying TACACS+ and RADIUS Group and User Settings

Action
Code Name
161 DEL_RADIUS_ATTR
78-16592-01
Table F-5 lists the action codes for creating, modifying, and deleting TACACS+
and RADIUS settings for Cisco Secure ACS groups and users. In the event that
Cisco Secure ACS has conflicting user and group settings, user settings always
override group settings.
Transactions using these codes affect the configuration displayed in the User
Setup and Group Setup sections of the HTML interface. For more information
about the User Setup section, see
information about the Group Setup section, see
Management".
Required
UN|GN,
VN,
Optionally
V2, V3
Chapter 7, "User
Description
Deletes the named RADIUS attribute for the group or
user, where:
VN = "Vendor-Specific"
•
V2 = IETF vendor ID
•
V3 = VSA attribute ID
•
For example, to specify the Cisco IOS/PIX vendor ID
and the Cisco AV Pair:
VN = "Vendor-Specific"
V2 = "9"
V3 = "1"
User Guide for Cisco Secure ACS for Windows Server
Action Codes
Management". For more
Chapter 6, "User Group
F-19