Cisco 3.3 User Manual page 801

Appendix F RDBMS Synchronization Import Definitions
Table F-4 Action Codes for Initializing and Modifying Access Filters
Action
Code Name
120 INIT_NAS_ACCESS_
CONTROL
121 INIT_DIAL_ACCESS_
CONTROL
122 ADD_NAS_ACCESS_
FILTER
78-16592-01
Transactions using these codes affect the configuration displayed in the User
Setup and Group Setup sections of the HTML interface. For more information
about the User Setup section, see
information about the Group Setup section, see
Management".
Required
UN|GN,V1
UN|GN,V1
UN|GN,V1
Chapter 7, "User
Description
Clears the AAA client access filter list and
initialize permit/deny for any forthcoming
filters. V1 should be one of the following values:
ACCESS_PERMIT
•
ACCESS DENY
•
Clears the dial-up access filter list and initialize
permit/deny for any forthcoming filters. V1
should be one of the following values:
• ACCESS_PERMIT
ACCESS DENY
•
Adds a AAA client filter for the user|group.
V1 should contain a single (AAA client name,
AAA client port, remote address, CLID) tuple;
for example:
NAS01,tty0,0898-69696969
Optionally, the AAA client name can be "All
AAA clients" to specify that the filter applies to
all configured AAA clients and an asterisk (*) to
represent all ports.
User Guide for Cisco Secure ACS for Windows Server
Action Codes
Management". For more
Chapter 6, "User Group
F-15