Cisco 3.3 User Manual page 462

Remote Logging
Select the applicable remote logging option:
Step 5
a.
b.
For each remote Cisco Secure ACS you want to have in the Selected Log Services
Step 6
list, follow these steps:
a.
b.
To assign an order to the servers in the Selected Log Services list, click Up and
Step 7
Down to move selected Cisco Secure ACSes until you have created the order you
need.
Note
User Guide for Cisco Secure ACS for Windows Server
11-30
To send the accounting information for this Cisco Secure ACS to more than
one Cisco Secure ACS, select the Log to all selected remote log services
option.
To send the accounting information for this Cisco Secure ACS to one
Cisco Secure ACS, select the Log to subsequent remote log services on
failure option.
Use the "Log to subsequent remote log services on failure" option
Note
when you want to configure Cisco Secure ACS to send accounting
data to a second remote Cisco Secure ACS if the first Cisco Secure
ACS fails.
In the Remote Log Services list, select the name of a Cisco Secure ACS to
which you want to send accounting data for locally authenticated sessions.
The Cisco Secure ACSes available in the Remote Log Services list is
Note
determined by the AAA Servers table in Network Configuration. For
more information about the AAA Servers table, see
Configuration, page
Click --> (right arrow button) to move the selected Cisco Secure ACS to the
Selected Log Services list.
If the "Log to subsequent remote log services on failure" option is
selected, Cisco Secure ACS logs to the first accessible Cisco Secure ACS
in the Selected Log Services list.
4-21.
Chapter 11 Logs and Reports
AAA Server
78-16592-01