Cisco 3.3 User Manual page 817

Appendix F RDBMS Synchronization Import Definitions
Table F-6 Action Codes for Modifying Network Configuration (continued)
Action
Code Name
353 SET_VSA_PROFILE
354 ADD_VSA_ENUM
78-16592-01
Required Description
V1, V2, V3 Sets the inbound/outbound profile of the VSA. The
profile specifies usage "IN" for accounting, "OUT"
for authorization, or "MULTI" if more than a singe
instance is allowed per RADIUS message.
Combinations are allowed.
V1 contains the vendor IETF code.
V2 contains the VSA number.
V3 contains the profile, one of the following:
IN
OUT
IN OUT
MULTI OUT
MULTI IN OUT
VN, V1, Sets meaningful enumerated values, if the VSA
V2, V3 attribute has enumerated. In the User Setup section,
the Cisco Secure ACS HTML interface displays the
enumeration strings in a list.
VN contains the VSA Enum Name.
V1 contains the vendor IETF code.
V2 contains the VSA number.
V3 contains the VSA Enum Value.
Example:
VN = Disabled
V1 = 9034
V2 = MyCo-Encryption
V3 = 0
or
VN = Enabled
V1 = 9034
V2 = MyCo-Encryption
V3 = 1
User Guide for Cisco Secure ACS for Windows Server
Action Codes
F-31