Assigning A Downloadable Ip Acl To A User - Cisco 3.3 User Manual

Chapter 7 User Management
Step 3

Assigning a Downloadable IP ACL to a User

Note
78-16592-01
Select the Disable account if option to disable the account under specific
b.
circumstances. Then, specify one or both of the circumstances under the
following boxes:
Date exceeds—Select the Date exceeds: check box. Then select the
•
month and type the date (two characters) and year (four characters) on
which to disable the account.
The default is 30 days after the user is added.
Note
Failed attempts exceed—Select the Failed attempts exceed check box
•
and then type the number of consecutive unsuccessful login attempts to
allow before disabling the account.
The default is 5.
Note
Do one of the following:
If you are finished configuring the user account options, click Submit to
•
record the options.
To continue to specify the user account options, perform other procedures in
•
this chapter, as applicable.
The Downloadable ACLs feature enables you to assign an IP Access Control List
(ACL) at the user level. You must configure one or more IP ACLs before you
assign one. For instructions on how to configure a downloadable IP ACL using
the Shared Profile Components section of the Cisco Secure ACS HTML interface,
see Adding a Downloadable IP ACL, page
The Downloadable ACLs table does not appear if it has not been enabled. To
enable the Downloadable ACLs table, click Interface Configuration, click
Advanced Options, and then select the User-Level Downloadable ACLs check
box.
5-10.
User Guide for Cisco Secure ACS for Windows Server
Basic User Setup Options
7-21