Cisco 3.3 User Manual page 815

Appendix F RDBMS Synchronization Import Definitions
Table F-6 Action Codes for Modifying Network Configuration (continued)
Action
Code Name
250 ADD_NDG
251 DEL_NDG
252 ADD_HOST_TO_NDG VN, V1
270 SET_DCS_
ASSIGNMENT
271 ADD_NDG_TO_DCS_
MAPPING
300 RESTART_PROTO_
MODULES
350 ADD_UDV
78-16592-01
Required Description
VN Creates a network device group (NDG) named (VN).
VN Deletes the named NDG.
Adds to the named AAA client/AAA server (VN) the
NDG (V1).
— —
— —
— Restarts the CSRadius and CSTacacs services to apply
new settings.
VN, V1, V2 Adds a RADIUS vendor to the Cisco Secure ACS
vendor database. Vendors added to Cisco Secure ACS
by this method are know as User-Defined Vendors
(UDV).
VN contains the name of the Vendor.
Cisco Secure ACS adds "RADIUS(...)" to the
Note
name entered in the Variable Name field. For
example, if you enter the name "MyCo",
Cisco Secure ACS displays "RADIUS
(MyCo)" in the HTML interface.
V1 contains the user-defined vendor slot number or
AUTO_ASSIGN_SLOT. Cisco Secure ACS has ten
vendor slots, numbered 0 through 9. If you specify
AUTO_ASSIGN_SLOT, Cisco Secure ACS selects
the next available slot for your vendor.
Note If you want to replicate UDVs between
Cisco Secure ACSes, you must assign the
UDV to the same slot number on both
Cisco Secure ACSes.
V2 contains the IANA-assigned enterprise code for
the vendor.
User Guide for Cisco Secure ACS for Windows Server
Action Codes
F-29