Preparing For Csv-Based Synchronization - Cisco 3.3 User Manual

RDBMS Synchronization

Preparing for CSV-Based Synchronization

Step 1
Step 2
Step 3
User Guide for Cisco Secure ACS for Windows Server
9-36
If you want to use a CSV file for your accountActions table, some additional
configuration is necessary. This is because the Microsoft ODBC CSV driver
cannot access the accountActions table unless the file has a .csv file extension.
To prepare for RDBMS synchronization using a CSV file, follow these steps:
Rename the accountactions CSV file installed on the computer running
Cisco Secure ACS to
accountactions.csv
Assuming a default installation of Cisco Secure ACS, the accountactions file is at
the following location:
C:\Program Files\CiscoSecure ACS v
Where x.x refers to the version of your Cisco Secure ACS.
Edit the Windows Registry:
Access the following key:
a.
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\CiscoAAAv
Change the OdbcUpdateTable value from
b.
accountactions.csv
You cannot perform synchronization using a relational database table
Note
rather than a CSV file when the OdbcUpdateTable value is
accountactions.csv
OdbcUpdateTable value back to
Save your changes to the Registry.
c.
Cisco Secure ACS is configured to perform CSV-based synchronization only,
using a file named accountactions.csv.
At a DOS prompt, follow these steps:
Type:
a.
net stop CSDBSync
and then press Enter.
Type:
b.
Chapter 9
.
x x
. \CSDBSync\Databases\CSV
AccountActions
.
. To do so, you must change the
AccountActions
System Configuration: Advanced
x x
. \CSDBSync
to
.
78-16592-01