Recalculating Crc Values; User-Defined Radius Vendors And Vsa Sets - Cisco 3.3 User Manual

Recalculating CRC Values

Step 2
Recalculating CRC Values
Note

User-Defined RADIUS Vendors and VSA Sets

User Guide for Cisco Secure ACS for Windows Server
D-28
Type:
number
CSUtil.exe -e -
where number is the error number found in the Cisco Secure ACS service log.
Press Enter.
The hyphen (-) before number is required.
Note
CSUtil.exe displays the text message equivalent to the error number specified.
The -c option is for use by the TAC. Its purpose is to resolve CRC (cyclical
redundancy check) value conflicts between files manually copied into your
Cisco Secure ACS directories and the values recorded in the Windows Registry.
Do not use the -c option unless a Cisco representative requests that you do.
This section provides information and procedures about user-defined RADIUS
vendors and VSAs.
This section contains the following topics:
About User-Defined RADIUS Vendors and VSA Sets, page D-29
•
Adding a Custom RADIUS Vendor and VSA Set, page D-29
•
Deleting a Custom RADIUS Vendor and VSA Set, page D-31
•
Listing Custom RADIUS Vendors, page D-32
•
Exporting Custom RADIUS Vendor and VSA Sets, page D-33
•
RADIUS Vendor/VSA Import File, page D-34
•
Appendix D CSUtil Database Utility
78-16592-01