Cisco Ios Dictionary Of Radius Av Pairs; Appendix C Radiu Attribute - Cisco 3.3 User Manual

Appendix C RADIUS Attributes
Note
Note
Table C-1 Cisco IOS Software RADIUS AV Pairs
Number Attribute
1 User-Name
2 User-Password
3 CHAP-Password
4 NAS-IP Address
5 NAS-Port
6 Service-Type
7 Framed-Protocol
9 Framed-IP-Netmask
10 Framed-Routing
11 Filter-Id
12 Framed-MTU
78-16592-01
If you specify a given AV pair on Cisco Secure ACS, the corresponding AV pair
must be implemented in the Cisco IOS software running on the network device.
Always consider which AV pairs your Cisco IOS release supports. If Cisco Secure
ACS sends an AV pair that the Cisco IOS software does not support, the attribute
is not implemented.
Because IP pools and callback supersede them, the following RADIUS attributes
do not appear on the Group Setup page:
8, Framed-IP-Address
19, Callback-Number
218, Ascend-Assign-IP-Pool
None of these attributes can be set via RDBMS Synchronization.
Table C-1 lists the supported Cisco IOS RADIUS AV pairs.
Type of Value
String
String
String
Ipaddr
Integer
Integer
Integer
Ipaddr (maximum length
15 characters)
Integer
String
Integer (maximum length
10 characters)
User Guide for Cisco Secure ACS for Windows Server

Cisco IOS Dictionary of RADIUS AV Pairs

Inbound/Outbound
Inbound
Outbound
Outbound
Inbound
Inbound
Both
Both
Outbound
Outbound
Outbound
Outbound
Multiple
No
No
No
No
No
No
No
No
No
Yes
No
C-3