Remote Logging Options - Cisco 3.3 User Manual

Remote Logging
Step 3
Step 4

Remote Logging Options

User Guide for Cisco Secure ACS for Windows Server
11-28
Add to the AAA Servers table each Cisco Secure ACS that the central logging
b.
server is to receive accounting data from. For more information, see
Server Configuration, page
If the central logging server is to log watchdog and update packets for
Note
a Cisco Secure ACS, be sure that the Log Update/Watchdog Packets
from this remote AAA Server check box is selected for that
Cisco Secure ACS in the AAA Servers table.
For each Cisco Secure ACS that is to send its accounting data to the central
logging server, follow these steps:
Add the central logging server to the AAA Servers table in Network
a.
Configuration. For more information, see
page 4-21.
b. Enable remote logging. For more information, see
Remote Logging, page
If you want to create other central logging servers, for use either as secondary
servers or as mirrored logging servers, perform Step 1 through Step 3 for each
additional server.
Cisco Secure ACS provides the remote logging options listed below. These
options appear on the Remote Logging Setup page.
• Do not log Remotely—Cisco Secure ACS writes accounting data for locally
authenticated sessions only to the local logs that are enabled.
• Log to all selected remote log services—Cisco Secure ACS sends
accounting data for locally authenticated sessions to all Cisco Secure ACSes
in the Selected Log Services list.
Log to subsequent remote log services on failure—Cisco Secure ACS
•
sends accounting data for locally authenticated sessions to the first
Cisco Secure ACS that is operational in the Selected Log Services list. This
4-21.
AAA Server Configuration,
11-29.
Chapter 11 Logs and Reports
AAA
Enabling and Configuring
78-16592-01