Scheduling Replication - Cisco 3.3 User Manual

Chapter 9 System Configuration: Advanced

Scheduling Replication

Note
Step 1
Step 2
Step 3
78-16592-01
Replication only occurs when the database of the primary Cisco Secure
Note
ACS has changed since the last successful replication. You can force
replication to occur by making one change to a user or group profile, such
as changing a password or RADIUS attribute.
You can schedule when a primary Cisco Secure ACS sends its replicated database
components to a secondary Cisco Secure ACS. For more information about
replication scheduling options, see
Replication cannot occur until the secondary Cisco Secure ACSes are configured
properly. For more information, see
page 9-17.
Before You Begin
Ensure correct configuration of the primary and secondary Cisco Secure ACSes.
For detailed steps, see
on Cisco Secure ACSes, page
For each secondary Cisco Secure ACS of this primary Cisco Secure ACS, ensure
that you have completed the steps in
page 9-17.
To schedule when a primary Cisco Secure ACS replicates to its secondary
Cisco Secure ACSes, follow these steps:
Log in to the HTML interface on the primary Cisco Secure ACS.
In the navigation bar, click System Configuration.
Click CiscoSecure Database Replication.
Outbound Replication Options, page
Configuring a Secondary Cisco Secure ACS,
Implementing Primary and Secondary Replication Setups
9-15.
Configuring a Secondary Cisco Secure ACS,
User Guide for Cisco Secure ACS for Windows Server
CiscoSecure Database Replication
9-12.
9-21