Dial-in Connection Issues
Dial-in Connection Issues
Condition
A dial-in user cannot
connect to the AAA
client.
No record of the
attempt appears in
either the TACACS+
or RADIUS
Accounting Report (in
the Reports & Activity
section, click
TACACS+
Accounting or
RADIUS Accounting
or Failed Attempts).
User Guide for Cisco Secure ACS for Windows Server
A-10
Recovery Action
Examine the Cisco Secure ACS Reports or AAA client Debug output to
narrow the problem to a system error or a user error. Confirm the following:
The dial-in user was able to establish a connection and ping the computer
•
before Cisco Secure ACS was installed. If the dial-in user could not, the
problem is related to a AAA client/modem configuration, not
Cisco Secure ACS.
LAN connections for both the AAA client and the computer running
•
Cisco Secure ACS are physically connected.
IP address of the AAA client in the Cisco Secure ACS configuration is
•
correct.
IP address of Cisco Secure ACS in AAA client configuration is correct.
•
TACACS+ or RADIUS key in both AAA client and Cisco Secure ACS are
•
identical (case sensitive).
The command ppp authentication pap is entered for each interface, if
•
you are using a Windows user database.
The command ppp authentication chap pap is entered for each interface,
•
if you are using the Cisco Secure ACS database.
The AAA and TACACS+ or RADIUS commands are correct in the AAA
•
client. The necessary commands are listed in the following:
Program Files\CiscoSecure ACS vx.x\TacConfig.txt
Program Files\CiscoSecure ACS vx.x\RadConfig.txt
The Cisco Secure ACS Services are running (CSAdmin, CSAuth,
•
CSDBSync CSLog, CSRadius, CSTacacs) on the computer running
Cisco Secure ACS.
Appendix A
Troubleshooting
78-16592-01