Configuring An Odbc Log - Cisco 3.3 User Manual

Chapter 11 Logs and Reports
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8

Configuring an ODBC Log

Note
78-16592-01
Click Add.
Select the driver you need to use with your new DSN, and then click Finish.
A dialog box displays fields requiring information specific to the ODBC driver
you selected.
Type a descriptive name for the DSN in the Data Source Name box.
Complete the other fields required by the ODBC driver you selected. These fields
may include information such as the IP address of the server on which the
ODBC-compliant relational database runs.
Click OK.
Close the ODBC window and Windows Control Panel.
The System DSN to be used by Cisco Secure ACS for communicating with the
relational database is created on the computer running Cisco Secure ACS. The
name you assigned to the DSN appears in the Data Source list on each ODBC log
configuration page.
The logs to which this procedure applies are as follows:
TACACS+ Accounting
•
TACACS+ Administration
•
RADIUS Accounting
•
VoIP Accounting
•
Failed Attempts
•
Before you can configure an ODBC log, you must prepare for ODBC logging. For
more information, see Preparing for ODBC Logging, page
User Guide for Cisco Secure ACS for Windows Server
Working with ODBC Logs
11-22.
11-23