Cisco 3.3 User Manual page 282

Advanced User Authentication Settings
To set the options for the TACACS+ Enable password, follow these steps:
Perform Step 1 through Step 3 of
Step 1
The User Setup Edit page opens. The username being added or edited is at the top
of the page.
Step 2 Do one of the following:
•
•
•
Do one of the following:
Step 3
•
•
User Guide for Cisco Secure ACS for Windows Server
7-36
To use the information configured in the Password Authentication section,
select Use CiscoSecure PAP password.
For information about basic password setup, see
Note
Account, page
To use an external database password, select Use external database
password, and then choose from the list the database that authenticates the
enable password for this user.
The list of databases displays only the databases that you have
Note
configured. For more information, see
Databases, page
To use a separate password, click Use separate password, and then type and
retype to confirm a control password for this user. This password is used in
addition to the regular authentication.
If you are finished configuring the user account options, click Submit to
record the options.
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
Adding a Basic User Account, page
7-4.
13-4.
Chapter 7 User Management
7-4.
Adding a Basic User
About External User
78-16592-01