Enabling Or Disabling A Csv Log - Cisco 3.3 User Manual

Chapter 11 Logs and Reports
Table 11-5 Default CSV Log File Locations (continued)
Log
User Password Changes
Cisco Secure ACS Active Service Monitoring

Enabling or Disabling a CSV Log

Note
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
78-16592-01
This procedure describes how to enable or disable a CSV log. For instructions
about configuring the content of a CSV log, see
page 11-19.
Some CSV logs are always enabled. For information about specific logs,
including whether you can disable them, see
Reports, page 11-6.
To enable or disable a CSV log, follow these steps:
In the navigation bar, click System Configuration.
Click Logging.
Click the name of the CSV log you want to enable.
The CSV log Comma-Separated Values File Configuration page appears, where
log is the name of the CSV log you selected.
To enable the log, under Enable Logging, select the Log to CSV log report check
box, where log is the name of the CSV log you selected in Step 3.
To disable the log, under Enable Logging, clear the Log to CSV report log check
box, where log is the name of the CSV log you selected in Step 3.
Click Submit.
If you enabled the log, Cisco Secure ACS begins logging information for the log
selected. If you disabled the log, Cisco Secure ACS stops logging information for
the log selected.
Default Location
CSAuth\PasswordLogs
Logs\ServiceMonitoring
About Cisco Secure ACS Logs and
User Guide for Cisco Secure ACS for Windows Server
Working with CSV Logs
Configurable?
No
No
Configuring a CSV Log,
11-17