Cisco 3.3 User Manual page 222

Configuration-specific User Group Settings
Tip
To allow all services to be permitted unless specifically listed and disabled, you
Step 5
can select the Default (Undefined) Services check box under the Checking this
option will PERMIT all UNKNOWN Services table.
This is an advanced feature and should only be used by administrators who
Caution
understand the security implications.
To save the group settings you have just made, click Submit.
Step 6
For more information, see
To continue specifying other group settings, perform other procedures in this
Step 7
chapter, as applicable.
User Guide for Cisco Secure ACS for Windows Server
6-32
To employ custom attributes for a particular service, you must select the
Custom attributes check box under that service, and then specify the
attribute/value in the box below the check box.
For more information about attributes, see
Attribute-Value Pairs", or your AAA client documentation.
For ACLs and IP address pools, the name of the ACL or pool as defined
on the AAA client should be entered. (An ACL is a list of Cisco IOS
commands used to restrict access to or from other devices and users on
the network.)
Leave the attribute value box blank if the default (as defined on the
Note
AAA client) should be used.
You can define and download an ACL. Click Interface
Note
Configuration, click TACACS+ (Cisco IOS), and then select
Display a window for each service selected in which you can enter
customized TACACS+ attributes. A box opens under each
service/protocol in which you can define an ACL.
Appendix B, "TACACS+
Saving Changes to User Group Settings, page
Chapter 6 User Group Management
78-16592-01
6-56.