Configuring A Leap Proxy Radius Server External User Database - Cisco 3.3 User Manual

LEAP Proxy RADIUS Server Database

Configuring a LEAP Proxy RADIUS Server External User Database

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
User Guide for Cisco Secure ACS for Windows Server
13-76
You should install and configure your proxy RADIUS server before configuring
Cisco Secure ACS to authenticate users with it. For information about installing
the proxy RADIUS server, refer to the documentation included with your
RADIUS server.
To configure LEAP proxy RADIUS authentication, follow these steps:
In the navigation bar, click External User Databases.
Click Database Configuration.
Cisco Secure ACS lists all possible external user database types.
Click LEAP Proxy RADIUS Server.
If no LEAP Proxy RADIUS Server configuration exists, only the Database
Configuration Creation table appears. Otherwise, in addition to the Database
Configuration Creation table, the External User Database Configuration table
appears.
If you are creating a configuration, follow these steps:
Click Create New Configuration.
a.
Type a name for the new configuration for the LEAP Proxy RADIUS Server
b.
in the box provided, or accept the default name in the box.
Click Submit.
c.
Cisco Secure ACS lists the new configuration in the External User Database
Configuration table.
Under External User Database Configuration, select the name of the LEAP Proxy
RADIUS Server database you need to configure.
If only one LEAP Proxy RADIUS Server configuration exists, the name
Note
of that configuration appears instead of the list. Proceed to Step 6.
Click Configure.
Chapter 13 User Databases
78-16592-01