Configuring A Csv Log - Cisco 3.3 User Manual

Chapter 11 Logs and Reports
Step 4

Configuring a CSV Log

Note
78-16592-01
To check for newer information in the current CSV report, click Refresh.
Tip
If you want to download the CSV log file for the report you are viewing, follow
these steps:
Click Download.
a.
Your browser displays a dialog box for accepting and saving the CSV file.
Choose a location to save the CSV file and save the file.
b.
This procedure describes how to configure the content of a CSV log. For
instructions to enable or disable a CSV log, see
page 11-17.
The logs to which this procedure applies are as follows:
• TACACS+ Accounting
TACACS+ Administration
•
RADIUS Accounting
•
VoIP Accounting
•
Failed Attempts
•
Passed Authentications
•
The ACS Backup and Restore, RDBMS Synchronization, and Database
Replication CSV logs cannot be configured.
You can configure several aspects of a CSV log:
Log content—You can select which data attributes are included in the log.
•
Log generation frequency—You can determine whether a new log is started
•
after a specific length of time or when the current CSV file reaches a
particular size.
Enabling or Disabling a CSV Log,
User Guide for Cisco Secure ACS for Windows Server
Working with CSV Logs
11-19