Performing Rdbms Synchronization Immediately - Cisco 3.3 User Manual

RDBMS Synchronization

Performing RDBMS Synchronization Immediately

Step 1
Step 2
Step 3
User Guide for Cisco Secure ACS for Windows Server
9-40
For more information about the AAA Servers table in Network Configuration, see
AAA Server Configuration, page
You can manually start an RDBMS synchronization event.
To perform manual RDBMS synchronization, follow these steps:
In the navigation bar, click System Configuration.
Click RDBMS Synchronization.
If this feature does not appear, click Interface Configuration, click
Note
Advanced Options, and then select the RDBMS Synchronization check
box.
The RDBMS Synchronization Setup page appears.
To specify options in the RDBMS Setup table, follow these steps:
For more information about RDBMS setup, see
Note
page 9-38.
From the Data Source list, select the system DSN you configured to
a.
communicate with the database that contains your accountActions table.
For more information about configuring a system DSN for use with RDBMS
Synchronization, see
Synchronization, page
In the Username box, type the username for a database user account that has
b.
read/write access to the accountActions table.
In the Password box, type the password for the username specified in the
c.
Step b.
Cisco Secure ACS has the information necessary to access the accountActions
table.
Chapter 9
4-21.
Configuring a System Data Source Name for RDBMS
9-37.
System Configuration: Advanced
RDBMS Setup Options,
78-16592-01