Assigning A User To A Client Ip Address - Cisco 3.3 User Manual

Basic User Setup Options
Step 3

Assigning a User to a Client IP Address

Step 1
Step 2
User Guide for Cisco Secure ACS for Windows Server
7-10
Do one of the following:
If you are finished configuring the user account options, click Submit to
•
record the options.
To continue to specify the user account options, perform other procedures in
•
this chapter, as applicable.
To assign a user to a client IP address, follow these steps:
Perform Step 1 through Step 3 of
The User Setup Edit page opens. The username being added or edited is at the top
of the page.
Under Client IP Address Assignment in the User Setup table, select the applicable
option. Choices include the following:
The IP address assignment in User Setup overrides the IP address
Note
assignment in Group Setup.
Use group settings—Select this option to use the IP address group
•
assignment.
• No IP address assignment—Select this option to override the group setting
if you do not want an IP address returned by the client.
• Assigned by dialup client—Select this option to use the IP address dialup
client assignment.
Assign static IP address—Select this option and type the IP address in the
•
box (up to 15 characters), if a specific IP address should be used for this user.
If the IP address is being assigned from a pool of IP addresses or by
Note
the dialup client, leave the Assign IP address box blank.
Chapter 7
Adding a Basic User Account, page
User Management
7-4.
78-16592-01