Cisco 3.3 User Manual page 111

Chapter 3 Interface Configuration
Table 3-1 RADIUS Listings in Interface (continued)
Configure
this Type
of AAA
Client... ...the Interface Configuration Page Lists the Types of Settings Shown
RADIUS
RADIUS (Cisco
(IETF) Aironet)
RADIUS Yes No
(Ascend)
RADIUS Yes No
(Cisco
VPN
3000)
RADIUS Yes No
(Cisco
VPN
5000)
RADIUS Yes No
(Juniper)
RADIUS Yes No
(Nortel)
RADIUS Yes No
(iPass)
Tip
78-16592-01
RADIUS
RADIUS (Cisco
(BBSM) IOS/PIX)
No No
No Yes
No No
No No
No No
No No
You must have your network devices configured before you can select, on the
Interface Configuration page, a type of setting for further configuration.
From the Interface Configuration page, when you select a type of RADIUS setting
to configure, the HTML interface displays the corresponding list of available
RADIUS attributes and associated check boxes. If you have selected the Per-user
TACACS+/RADIUS Attributes check box in Interface Configuration: Advanced
Options, a User check box appears alongside the Group check box for each
attribute. Otherwise, only the Group check box for each attribute appears. By
Protocol Configuration Options for RADIUS
RADIUS
RADIUS (Cisco
(Micros RADIUS VPN
oft) (Ascend) 3000)
Yes Yes No
Yes No Yes
No No No
No No No
No No No
No No No
User Guide for Cisco Secure ACS for Windows Server
RADIUS
(Cisco
VPN RADIUS RADIUS
5000) (Juniper) (Nortel)
No No No
No No No
Yes No No
No Yes No
No No Yes
No No No
3-13