Editing A Aaa Client - Cisco 3.3 User Manual

Chapter 4 Network Configuration

Editing a AAA Client

Note
Step 1
78-16592-01
If you want to save your changes and apply them later, click Submit.
Tip
When you are ready to implement the changes, click System
Configuration, click Service Control, and then click Restart.
You can use this procedure to edit the settings for a AAA client configuration.
You cannot directly edit the name of a AAA client; rather, you must delete the
AAA client entry and then re-establish the entry with the corrected name. For
steps about deleting a AAA client configuration, see
page 4-21. For steps about creating a AAA client configuration, see
AAA Client, page 4-16.
Before You Begin
For descriptions of the options available while editing a AAA client
configuration, see AAA Client Configuration Options, page
For Cisco Secure ACS to provide AAA services to a AAA client, you must ensure
that gateway devices between AAA clients and Cisco Secure ACS permit
communication over the ports needed to support the applicable AAA protocol
(RADIUS or TACACS+). For information about ports used by AAA protocols,
see AAA Protocols—TACACS+ and RADIUS, page
To edit a AAA client, follow these steps:
In the navigation bar, click Network Configuration.
The Network Configuration page opens.
User Guide for Cisco Secure ACS for Windows Server
AAA Client Configuration
Deleting a AAA Client,
Adding a
4-11.
1-6.
4-19