1/10Gbps Sfp+ Port Led; Figure 5: Link/Activity Led For The 1/10Gbps Sfp+ Port - Allied Telesis GS970EMX/10 Installation Manual

Chapter 1: Overview
1/10Gbps SFP+
Port LED
28
Table 5 describes the LEDs.
Table 5. Link/Activity LEDs on the 1/2.5/5/10Gbps Copper Port
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
The 1/10Gbps SFP+ port has one LED that displays link/activity
information. The LED is shown in Figure 5.
Figure 5. Link/Activity LED for the 1/10Gbps SFP+ Port
Description
The port has established a 2.5Gbps,
5Gbps, or 10Gbps link to a network
device.
The port is transmitting or receiving data
at 2.5Gbps, 5Gbps, or 10Gbps.
The port has established a 1Gbps link to a
network device.
The port is transmitting or receiving data
at 1Gbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.