Table of Contents
Advertisement
Off
SFP Port LEDs
The LEDs for the SFP ports on the GS950/10PS V2, GS950/18PS
V2, and GS950/28PS V2 Switches are on the left side of the front
panels. This example is from the GS950/28PS V2 Switch.
The LEDs for the SFP ports on the GS950/52PS V2 Switch are
located between the ports.
Solid
The port has established a 1Gbps link to a network
green
device.
Flashing
The port is transmitting or receiving packets at 1Gbps.
green
GS950PS V2 Series Quick Installation Guide
This LED state can result from the following
conditions:
- The port is not connected to a powered
device or the device is powered off.
- The port is disabled in the management
software.
- PoE+ is disabled on the port.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
19
Advertisement
Table of Contents
