Table of Contents
Advertisement
5.1.10. Telecine Interface
Connector:
9 pin female "D"
Tach Input:
bi-phase quadrature pulses - 1,2,5, or 10 x film rate, TTL level
Frame Pulse:
Cintel:
> 1.6 V p-p active low,, 1 pulse per film frame, (BNC per IEC 60169-8 Amendment 2)
Thomson: TTL level SOF, 1 edge per film frame (9 pin female D)
Sony:
> 1.6 V p-p active high, 1 pulse per film frame, (BNC per IEC 60169-8 Amendment 2)
5.1.11. GPIO Interface
Connector:
9 pin female "D"
Type:
Opto-isolated bi-directional I/O – TTL level
Number:
5
Function:
user programmable
5.1.12. Physical
Dimensions: 19" W x 1.75" H x 18.75" D.
(483mm W x 45mm H x 477mm D)
Weight:
8 lbs. (3.5Kg)
5.1.13. Electrical
Power:
115/230 V AC 50/60 Hz, 30 VA.
Safety:
ETL listed.
Complies with EU safety directive
EMI/RFI: Complies with FCC Part 15 Class A,
EU EMC Directive
5.2.
UPGRADING FIRMWARE
The 9025TR contains firmware that is contained in a FLASH EPROM device. From time to time firmware
updates will be provided to add additional features to the unit. If you have the KeyLog Tracker software
successfully interfaced to your 9025TR, then it is very simple to upgrade its firmware from Tracker using
the procedure outlined in section 5-4. Otherwise use the procedure outlined in section 5-5 to upload new
firmware from your computer.
TECHNICAL DESCRIPTION
9025TR Series Film Footage Encoders Manual
Revision 1.3
Page 5-3
Advertisement
Table of Contents
