Audio Bar Graphs; Vitc Time Code Window; Table 7-2: Video/Audio Status Screen Items - evertz 7735CEM Manual

7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring
Item Value(s)
Video 525/625/not present/
525 (wrong std)/625 (wrong std)
Picture Moving/frozen/frozen,black
Content
VITC TC Value/not present
VITC SID SID value/not present
PESA SID SID value/not present
PR Value/not present
CC Present/not present
Ch. 1 and 2 Not present/[(silent/over), (mono/out
of phase)]
Ch. 3 and 4 Not present/[(silent/over), (mono/out
of phase)]

7.8.1.2. Audio Bar Graphs

Audio level (peak and/or average) and phase information can be displayed in a number of different forms.
See section 7.7 for information on configuring the bar graphs. The source is selectable between the
embedded audio (all versions of hardware) and the external AES audio (–A4 and –AES versions).
On the 7735CEM-A4, the audio level/phase information is displayed after the source selection, routing but
before the output gain control (gain is controlled in the D to A conversion).
On the 7735CEM-AES, the audio level/phase information is displayed after the source selection, routing
and the gain control.
On the 7735CEM, the audio level/phase information is displayed as it is embedded.

7.8.1.3. VITC Time Code Window

The VITC time code window shows the vertical interval time code present at the input to the CEM module.
Use the VITC line select items on the Video menu to configure the lines that the CEM will use for reading
VITC. (See sections 7.5.17 and 7.5.18 for information about setting the VITC line numbers.)
Warning: Because the video goes through a frame synchronizer, the time code displayed will not
necessarily be the correct time code number for that particular frame of video. However, it will not be
more than one frame in error.
The TC window size menu item controls whether the time code window will be displayed in the normal or
large font size.
7735CEM-36
Gray background indicate un-implemented or un-tested features

Table 7-2: Video/Audio Status Screen Items

Revision 1.1.1
Description
Input video standard detected. If the card is a
different standard than what is on the input,
(wrong std) will be displayed.
Shows the status of the picture content. Shows
moving if the picture is active, frozen if the card
detects no motion, or frozen,black if the picture is
black
If present, the time code value is displayed here.
If present, the VITC SID is displayed here.
If present, the PESA SID is displayed here.
The program rating of Closed Captioning is
indicated, if present.
The presence/absence of Closed Captioning is
indicated.
Status information about channels 1 and 2 are
shown here.
Status information about channels 3 and 4 are
shown here.