Maintenance - Swan Analytical Instruments AMI Codes-II O3 Operator's Manual

AMI Codes-II O3
Program List and Explanations

3 Maintenance

3.1 Calibration
3.1.1
3.2 Service
3.2.1
3.2.2
3.2.3
3.2.3.3
3.3 Simulation
3.4 Set Time
A-96.250.881 / 070622
Process DIS: Possibility to correct the disinfectant value. See
Process Calibration of DIS, p.
Verification: Performs a verification using the reference kit. Follow
dialog. See Verification, p.
Fill System: Activates the reagent pump.
Reagents: Displays the date of the last filling and the remaining
number of days until the maximum storage time of 30 days is
exceeded.
Change reagents: Resets the counter and saves the date of the new
filling.
To simulate a value or a relay state, select the
 alarm relay,
 relay 1 or 2
 signal output 1 or 2
with the [ ] or [
Press the [Enter] key.
Change the value or state of the selected item with the [
[ ] key.
Press the [Enter] key.
 The value is simulated by the relay/signal output.
Alarm Relay:
Relay 1 and 2:
Signal Output 1 and 2:
Signal Output 3:
At the absence of any key activities, the instrument will switch back
to normal mode after 20 min. If you quit the menu, all simulated val-
ues will be reset.
Adjust date and time.
50, for more details.
46.
] key.
Active or inactive
Active or inactive
Actual current in mA
Actual current in mA (if option is installed)
] or
71