Program Overview; Messages (Main Menu 1) - Swan Analytical Instruments AMI Codes-II O3 Operator's Manual

AMI Codes-II O3

Program Overview

8.
8.1.
Pending Errors
Pending Errors
1.1*
Maintenance List
Maintenance List
1.2*
Message List
Number
1.3*
Date, Time
Audit Trail
Number
1.4*
Date, Time
Event
Note
A-96.250.881 / 070622
Program Overview
All menus are password-protected as soon as an administrator pass-
word has been defined.
 Menu 1 Messages informs about pending errors and mainte-
nance tasks and shows the error history. Access by administra-
tor, service and operator. No settings can be modified.
 Menu 2 Diagnostics: Access by administrator, service and op-
erator. No settings can be modified.
 Menu 3 Maintenance: Calibration, simulation of outputs and
set time/date. Access by administrator and service.
 Menu 4 Operation: Allows to set limits, alarms values, etc. Ac-
cess by administrator and service.
 Menu 5 Installation: Defining assignment of all inputs and out-
puts, measuring parameters, interface, passwords, etc. Access
by administrator only.
Further information see chapter 9,

Messages (Main Menu 1)

1.1.5*
1.2.5*
1.3.1*
5.4.4, p. 83.
* Menu numbers
63