Engine Disassembly; Preparations - Husqvarna FC 350 2014 Repair Manual

17 ENGINE
17.3
Engine disassembl
17.3.1

Preparations

-
Attach negative cable fl!).
Guideline
Screw, battery terminal
• Info
I
O
Contact disk
with the claws facing down.
G
-
Remove filler plug and the engine oil.
I
Engine oil 11.10 I (1.16 qt.)
-
Mount and tighten filler plug
Finishing work
-
Install the main silencer. (- p. 75)
-
Install the right side cover. (- p. 80)
-
Install the fuel tank. (- p. 81)
-
Mount the seat. (- p. 80)
-
Remove the motorcycle from the lift stand. (- p. 10)
-
Refill the coolant. (- p. 193)
-
Execute the initialization run. (- p. 201)
-
Take a short test ride.
-
Read out the fault memory using the Husqvarna diagnostics tool.
-
Check the engine for leakage.
-
Check the engine oil level. (- p. 194)
-
Check the coolant level. (- p. 192)
-
Mount the special tool on the engine mounting block.
Engine fixing arm (77229002000) (- p. 226)
Engine assembly stand (61229001000) (- p. 225)
-
Mount the engine on the special tool.
• Info
I
Work with an assistant or a motorized hoist.
M5
must be mounted between screw @D and cable lug Cii)
I
Engine oil (SAE 1 0W/50) (- p. 218)
G.
130
2.5 Nm
(1.84 lbf ft)