Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
·�
e-
-
Pierce the membrane with the needle of the special tool.
I
Nitrogen charging tool (T14019) (- p. 231)
✓ The pressurized nitrogen is bled off.
200838-10
-
Loosen and remove screw cap
I
Pin wrench (T103) (- p. 228)
-
Unclamp the cartridge.
-
Empty the cartridge.
200840-10
-
Reclamp the cartridge upside down.
Guideline
I
Use soft jaws.
-
Heat the cartridge in area
Guideline
1100 °C (212 °F)
-
Loosen the screw sleeve and remove the piston rod.
200842-10
-
Remove spring guide
-
Remove guide ring
200843-10
C,
with the membrane holder.
f)
of pilot bushing @t.
0)
and ring@.
@).
20
Advertisement
Chapters
Table of Contents
