Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna FC 350 2014 Repair Manual

EXHAUST
10
Removin the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down. Do not touch hot components.
Changing the glass fiber �arn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Finishing work
-
Install the main silencer. (,.... p. 75)
-
Install the right side cover. (,.... p. 80)
-
Remove the motorcycle from the lift stand. (,.... p. 10)
Preparatory work
-
Remove the right side cover. (,.... p. 79)
Main work
O.
-
Disconnect spring
I
Spring hook (50305017000) (,.... p. 221)
8
-
Remove screws and take off the main silencer.
Main work
Mount the main silencer. Mount screws
I Guideline
Remaining screws, chassis
8.
-
Reconnect spring
O.
-
Tighten screws
Guideline
I
Remaining screws, chassis
Finishing work
-
Install the right side cover. (,.... p. 80)
Preparatory work
-
Remove the right side cover. (,.... p. 79)
-
Remove the main silencer. (,.... p. 75)
O
but do not tighten yet.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
75