Checking The Starter Relay - Husqvarna FC 350 2014 Repair Manual

15
WIRING HARNESS, BATTERY
15.7 Checkin the starter rela
Preparatory work
-
Switch off all power consumers and switch off the engine.
-
Remove the seat. (.- p. 80)
-
Remove the air filter box lid. (.- p. 77)
Main work
-
Disconnect the negative cable of the battery.
0-
Pull off connector
Pull back the cover.
8
-
Detach cable from the starter relay.
-
Pull the starter relay off of the holder.
-
Connect the starter relay to a 12 V power supply as shown.
-
Measure the resistance between the specified points.
I
Resistance of open circuit
If the value displayed does not meet specifications:
-
Change the starter relay.
-
Mount the starter relay onto the holder and lay the cable.
8
-
Clamp cable on the starter relay.
O.
-
Plug in connector
-
Connect the negative cable of the battery.
Finishing work
-
Install the air filter box lid. (.- p. 77)
-
Mount the seat. (.- p. 80)
I
on
108