Installing The Transmission Shafts; Installing The Shift Forks; Installing The Shift Drum - Husqvarna FC 350 2014 Repair Manual

17 ENGINE
17.5.2

Installing the transmission shafts

17.5.3

Installing the shift forks

0-
17.5.4

Installing the shift drum

-
Oil the bearing.
-
Slide both transmission shafts
-
Mount lock ring @ .
O
-
Shift fork has a smaller inside diameter; mount this in the shift groove of the
main shaft.
-
Mount shift fork @ in the lower shift groove of the countershaft.
fD
-
Mount shift fork in the upper shift groove of the countershaft.
8.
-
Slide on shift rollers
Tip
Fix the shift rollers in the shift forks with grease.
O
-
Push shift drum into the bearing seat.
-
Put shift forks @ in the shift drum.
Info
Do not misplace the shift rollers.
O
into the bearing seats together.
170