Installing The Locking Lever; Installing The Shift Drum Locating Unit - Husqvarna FC 350 2014 Repair Manual

17 ENGINE
17.5.12

Installing the locking lever

17.5.13

Installing the shift drum locating unit

@.
-
Position suction pump
-
Crank the oil pump gear wheel and ensure that it can move easily.
-
Mount O-ring (D .
-
Position oil pump cover
-
Mount and tighten screws
Guideline
Screw, oil pump cover
O
-
Mount locking lever with the washer, sleeve and spring.
-
Mount and tighten screw @ .
Guideline
Screw, locking lever
-
Push away locking lever
shift drum locating unit @ .
• Info
I
The flat areas of the shift drum locating unit are not symmetric.
-
Relieve tension from the locking lever.
-
Mount and tighten screw (D .
Guideline
Screw, shift drum locating
C,.
0.
M5 6Nm
(4.4 lbf ft)
M5 6Nm
(4.4 lbf ft)
O
from the shift drum locating unit and position the
M6 10 Nm
(7.4 lbf ft)
174
Loctite 243
® ™
Loctite 243
® ™
Loctite 243
® ™