17
ENGINE
••
-
-
E"I//
£ V 1)",
17.4.22
Checking the valves
17.4.23
Checking the valve springs
17.4.24
Checking the valve spring seat
-
Mark the valves corresponding to their installation position.
•
Info
I
Place the valves in a carton corresponding to their installation position and
label them.
300117-10
-
Check the valve plate for run-out.
Valve - run-out
At the valve plate
If the measured value does not meet specifications:
-
Change the valve.
200193-10
-
Check sealing seat
Valve - sealing seat width
Intake
Valve - sealing seat width
Exhaust
If the sealing seat is not centered on the valve seat or deviates from the speci
fication:
302809-10
-
Rework the valve seat.
-
Check the valve springs for breakage and wear (visual check).
•
Info
I
Intake valves are marked with a green color coding.
Exhaust valves are marked with a brown color coding.
If the valve spring is broken or worn:
-
Change the valve spring.
-
Measure the length of the valve springs.
305015-10
Valve spring
Minimum length of intake valve
Minimum length of exhaust valve
If the measured value does not meet specifications:
-
Change the valve springs.
-
Check the valve spring seat for breakage and wear (visual check).
If the valve spring seat is broken or worn:
-
Change the valve spring seat.
-
Measure the thickness of the valve spring seat.
I
Valve spring seat - thickness
If the measured value does not meet specifications:
305014-10
:,; 0.05 mm (:,; 0.002 in)
6)
on the valve.
1 .40 mm (0.0551 in)
1 .40 mm (0.0551 in)
I
41.20 mm (1.622 in)
I
41.10 mm (1.6181 in)
I
1 .40 ... 1.60 mm (0.0551 ... 0.063 in)
156