WHEELS
14
14.6.11
Changing the rear wheel bearing
Preparatory work
-
Raise the motorcycle with the lift stand. (r p. 10)
-
Remove the rear wheel. (r p. 95)
Main work
0-
Remove shaft seal ring
8.
-
Remove lock ring
@).
-
Remove shaft seal ring
-
Using a suitable tool, press bearing
0-
-
Remove spacing tube
-
Using a suitable tool, press bearing
0)
-
Press the new bearing
•
Info
I
Only press the bearing in via the outer ring; otherwise, the bearing will be
damaged when it is pressed in.
C,
out from the inside to the outside.
0)
out from the inside to the outside.
all the way in from the outside to the inside.
103