Engine Disassembly; Preparations; Draining The Engine Oil - Husqvarna FE 450 2014 Repair Manual

18.3 Engine disassembl�
18.3.1

Preparations

18.3.2

Draining the engine oil

Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and check that it is oil-tight.
-
Switch off the engine.
-
Check the engine oil level.
-
Check the coolant level.
-
Execute the initialization run.
Finishing work
-
Take a test ride.
-
Read out the fault memory using the Husqvarna Motorcycles
diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level.
-
Check the coolant level.
-
Install the engine guard.
-
Mount the special tool on the engine assembly stand.
Holder and fitting for work stand (78029002000)
Engine work stand (80329001000)
Mount the engine on the special tool.
Info
Work with an assistant or a motorized hoist.
O
-
Remove oil drain plug
Exhaust gases are toxic and
(l!!,!I p. 234)
(l!!,!I p. 231)
(l!!,!I p. 244)
(l!!,!I p. 234)
(0 p. 231)
(0 p. 47)
(�
(0 p. 320)
with the magnet and seal ring.
18 ENGINE
p. 319)
159