Husqvarna FC 350 2014 Repair Manual page 181

17 ENGINE
Apply a thin layer of sealing compound in area G).
I
Loctite 5910
®
Place the cylinder base gasket on.
Info
Ensure that the dowel pins are seated properly.
Cover the engine case opening with a cloth. Thread the timing chain through the
chain shaft. Mount the piston pin.
• Info
I
In order to present them more clearly, the following steps are shown with a
removed piston.
Position the piston pin retainer.
Insert the special tool and press it forcefully to the piston.
Turn the special tool clockwise, thereby pushing the piston pin retainer into the
groove.
I
Insertion for piston ring lock (77229030000) (.- p. 227)
Ensure that the piston pin retainer is seated properly on both sides.
Remove the cloth.
Keep the timing chain taut. Push the cylinder down carefully and let the dowel
pins engage.
179