Engine Assembly; Installing The Crankshaft - Husqvarna FC 350 2014 Repair Manual

17 ENGINE
Main work
-
Fix the countershaft in the vise with the toothed end facing downward.
Guideline
Use soft jaws
O
-
Mount needle bearing
-
Mount stop disk (D and lock ring
-
Mount fourth-gear sliding gear
-
Mount lock ring (D and stop disk @.
-
Mount needle bearing G) and third-gear idler gear
GD
-
Mount stop disk and lock ring
-
Mount fifth-gear sliding gear � with the shift groove facing downward.
-
Mount stop disk G).
-
Mount needle bearing • and first-gear idler gear
-
Mount stop disk 41).
-
Finally, check all gear wheels for smooth operation.
17.5
Engine assembl
17.5.1

Installing the crankshaft

8
and second-gear idler gear
8.
0
with the shift groove facing upward.
@)
41.
48.
-
Position the right section of the engine case in the engine work stand.
-
Oil the bearing.
I
Engine oil (SAE 1 0W/50) (
Push crankshaft
306559-10
onto the countershaft with the protruding collar facing downward.
with the shift dogs facing upward.
p. 218)
,....
O
into the bearing seat.
169