Finishing Work - Install The Rear Wheel; Remove The Motorcycle From The Lift Stand - Husqvarna FC 350 2014 Repair Manual

WHEELS
14
-
Clean, grease, and mount spacing tube
I
Long-life grease (- p. 219)
C,
-
Press the new bearing
Info
•
I
Only press the bearing in via the outer ring; otherwise, the bearing will be
damaged when it is pressed in.
-
Grease the new shaft seal ring
-
Mount lock ring (i}.
✓ The lock ring engages audibly.
-
Grease the new shaft seal ring
Finishing work
-
Install the rear wheel. (- p. 96)
-
Remove the motorcycle from the lift stand. (- p. 10)
C,.
all the way in from the outside to the inside.
(D
and press it in until it is flush.
O
and press it in until it is flush.
104