Removing The Clutch Cover; Removing The Clutch Discs; Removing The Outer Clutch Hub - Husqvarna FC 350 2014 Repair Manual

17 ENGINE
17 .3.18

Removing the clutch cover

17 .3.19

Removing the clutch discs

Removing the outer clutch hub

17 .3.20
O.
-
Remove screws
-
Take off the clutch cover.
-
Remove the clutch cover seal.
O
-
Loosen screws and remove together with the washers and springs.
-
Take off the pressure cap.
-
Completely remove clutch discs
-
Remove pressure piece
-
Bend up the lock washer.
-
Hold the inner clutch hub with the special tool. Loosen nut
I
Clutch holder (59029003100) (.- p. 223)
-
Remove the nut with the lock washer.
-
Take off inner clutch hub
• Info
I
The washer usually sticks to the inner clutch hub.
C,.
-
Take off
8.
8.
8
and washer@.
138
O.