Assembling The Damper - Husqvarna FS 450 2018 Repair Manual

9.23
Assemblin the damper
SHOCK ABSORBER, LINK FORK 9
-
Lubricate the thread of the piston rod.
I
Lubricant (T152)
-
Mount and tighten nut
Guideline
I
Nut, piston rod
G02060-10
Preparatory work
-
Assemble the seal ring retainer.
-
Assemble the piston rod.
Main work
-
Lubricate the O-rings of the compression adjuster.
I
Lubricant (T158)
-
Lubricate the thread.
I
Lubricant (T159)
-
Mount the piston with the spring.
-
Mount and tighten compression adjuster
Guideline
Compression damp-
ing adjuster
-
Clamp the damper in a bench vise.
Guideline
I
Use soft jaws.
-
Mount adjusting ring
Info
The adjusting ring cannot be mounted after the piston
rod has been mounted.
-
Fill the damper cartridge about half full.
I
Shock absorber fluid (SAE 2.5) (50180751S1)
-
Lubricate O-ring
I
Lubricant (T158)
-
Mount the piston rod carefully.
B04402-10
(8 p. 302)
@).
I M12x1 I 40 Nm (29.5 lbf ft)
(0 p. 72)
(8 p. 73)
(0 p. 302)
(8 p. 303)
O.
M31 x1 35 Nm (25.8 lbf ft)
8
with the clamping ring.
(D
of the seal ring retainer.
(8 p. 302)
...
(0 p. 301)
75